Model „VarioCarat®“
Block Optic Design GmbH., Semerteichstr. 60, 44141 Dortmund, Tel.: +49 231 1087785-0, Fax: +49 231 1763065
8
The coupling of the examination/refraction unit with non-medical devices (e.g. data processing
devices) to a medical-electrical system must not lead to a safety hazard for the patient, user and the
environment.
Mounting third party devices on or at the examination/refraction
unit
NOTE!
The assembly of corresponding devices for diagnostics may only be carried out by the
company Block Optic or by the approval of a company authorised by Block Optic.
The safety specifications and regulations for the assembly or the corresponding
commissioning can be found in the corresponding instructions for the device.
Basic concept
The VarioCarat® examination/refraction unit is used to accommodate the examination/refraction
devices commonly used in ophthalmology and optometry. The examination/refraction unit with the
installed devices is the central point for the devices and any connected external wiring, e.g. curtain
pull or room lighting.
An extension of the examination/refraction unit VarioCarat® is possible according to the modular
principle.
Due to the large number of possible combinations, consultation with the Block Optic sales
department or a specialist company authorised by Block Optic is required (possible extensions
in the Appendix).
CAUTION!
The installation of the wall connection box in the house electronics with connection of the
external loads may only be carried out by a certified electrical specialist company and not by
Block Optic.
FORBIDDEN!
The wall junction box may only be opened by Block Optic or a Block Optic certified electrical
contractor.
All adjustments in this item may only done by Block Optic or a specialist company authorised
by Block Optic.