Page 3
SnowBlind™ Manual - Rev. A
Copyright (c) 2012 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x SnowBlind™
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on purchasing one way cool, way flexible, way original LED
strobe light! Now that you’ve got your SnowBlind™ (or hopefully,
Snow
Blind’s!
), you should carefully unpack the box and check the contents to
ensure that all parts are present and in good condition. If anything looks as if
it has been damaged in transit, notify the shipper immediately and keep the
packing material for inspection. Again, please save the carton and all packing
materials. If a fixture must be returned to the factory, it is important that the
fixture be returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and
cannot be run
off a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel is used solely for a 0% to 100% switch
.
AC Voltage Switch -
Not all fixtures have a voltage select switch, so please
verify that the fixture you receive is suitable for your local power supply. See
the label on the fixture or refer to the fixture’s specifications chart for more
information. A fixture’s listed current rating is its average current draw under
normal conditions. Check the fixture or device carefully to make sure that if a
voltage selection switch exists that it is set to the correct line voltage you will
use.
Warning!
Verify that the voltage select switch on your unit matches
the line voltage applied. Damage to your fixture may result if the line
voltage applied does not match the voltage indicated on the voltage
selector switch. All fixtures must be connected to circuits with a
suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call or send an email. We’ll be
happy to help, honest.
Blizzard Lighting
W220 N1531 Jericho Ct. Ste E
Waukesha, WI 53186 USA
www.blizzardlighting.com
414-395-8365
Email: [email protected]