Lit. No. 68251, Rev. 09
48
May 1, 2021
8. Durable and long lasting, the POWER PLOW™
polyurethane moldboard and wing cutting edges
will keep you plowing longer and safer! Specially
formulated for snow plowing applications,
BLIZZARD
®
poly edges resist gouging, provide
superior wear life, and e
ff
ectively reduce plowing
noise. Ideal for all plowing conditions. Edges are
shipped with mounting hardware.
9. Putting your snowplow away for the winter? Have
a deep scratch to cover? Clean up your blade
and snowplow parts with our gloss spray paints.
BLIZZARD touch-up paint provides an excellent
fi
nish to help keep your snowplow looking its best.
Paint provided in 12-oz spray cans.
ACCESSORIES & KITS
10. Ballast (additional weight) is an important part of
qualifying vehicles for snowplow eligibility. Rear
ballast must be used when necessary to remain
in compliance with axle ratings and ratios as
speci
fi
ed by the vehicle manufacturer. If ballast is
required, it is important that it be secured properly
behind the rear axle. A ballast retainer kit is
available from your BLIZZARD outlet, PN 62849.
NOTE: The ballast retainer kit is for snowplow
vehicles requiring ballast. See your BLIZZARD
outlet for the correct amount of ballast required.
Include the weight of the retainer as part of the
ballast requirement. Sand bags are recommended
for use as ballast.
NOTE: Ballast recommended and its weight
calculations assume the entire width of the bed is
fi
lled as close to tailgate as possible.
Passenger-Side
Ballast Retainer
Driver-Side
Ballast Retainer
