4.3 Electrical Connection
Check that the supply conforms with the requirements listed on the
factory label and that it is provided with a circuit breaker with sufficient
earth connection. Should there be none present, ensure one is supplied
and installed by a suitably qualified engineer by means of an omnipolar
switch as indicated in the safety regulations with a minimum clearance of
the contacts of
3mm
.
Where the cabinet has to be stored at distance from the power supply,
ensure that the ensuing connection conforms to all local safety
regulations. Cabinets supplied with integral condensing units are supplied
with an appropriate plug fitted with Neutral and Earth.
The supply cable must be well stretched to avoid coiling and
superimposition and it must not be exposed to the possibility of damage
by third parties. It should be kept clear of liquids, water or heat sources
and in the event of damage, must be replaced by a suitably qualified
person.
4.4 Connection to Drains
The evaporation of the defrost water is automatic in all models with an
integral condensing unit. Models with a remote condensing unit can be
supplied with a heater.
