Page 9
Big Bad Lo Fo Manual - Rev. A
(c) 2018 Blizzard Lighting, LLC
Control Panel Menu Structure
Interval
0s–255s (seconds)
Pause time between timed output
DMX
1–512
Set the starting DMX address
Volume
0%–100%
Set the volume output
Fan Speed
1%–100%
Set the fan speed
Duration
0s–200s (seconds)
Duration time of timed operation
DMX Configuration
1. Press the
<MENU>
button until
DMX
is highlighted and flashing.
2. Use
<UP/DOWN>
to select the starting address 1–512.
3. Press the
<ENTER>
button to confirm.
Interval and Duration Settings
Interval settings control the period of time in between timed fog outputs (in sec-
onds), while duration settings are used to control the actual period of time of the
timed output (in seconds) while using timer mode.
1. Press the
<MENU>
button repeatedly until
Interval
or
Duration
is highlighted
and flashing.
2. Use
<UP/DOWN>
to select the number of seconds (0–200).
3. Press the
<ENTER>
button to confirm.
4. Press the
<TIMER>
button to start your configured timed output.
Set the Output Volume
1. Press
<MENU>
repeatedly until
Volume
flashes on the display.
2. Use
<UP/DOWN>
to select an output volume percentage (1%–100%).
3. Press the
<ENTER>
button to confirm.
Set the Fan Speed
1. Press
<MENU>
repeatedly until
Fan Speed
flashes on the display.
2. Use
<UP/DOWN>
select a total speed percentage (1%–100%).
3. Press the
<ENTER>
button to confirm.
