Blizzard Lighting Wink Manual Download Page 5

Page: 5 / 20

Page 5

Wink™ User Manual - Rev. A

2. MEET WINK™

MAIN FEATURES

• 1* 60W RGBW high power 4-in-1 LED

• 4-segment RGB colored ring with 8* 0.5W RGB 3-in-1 LEDs

• Individual pixel and LED ring control

• 5-45 degree zoomable beam angle

• Blazing fast 540°/270° + infinite pan/tilt

• Built-in auto and sound active programs

• Multiple static color presets and virtual color wheel

• Variable electronic dimming & strobe effects (1-20Hz)

• Flicker-free constant-current LED driver

• 3-pin male input and 3-pin female output

• PowerCON™ compatible AC power In/Out connectors

• Protocol: USITT DMX-512

• 19/26/35-channel DMX modes

• 2.4 inch TFT color LCD display panel with 4x touch sensitive buttons

DMX Quick Reference (19/26/35-Channel Modes)

CH. Basic (19ch)

CH. Standard (26ch)

CH. Extended (35ch)

Pan (0-540°)

Tilt (0-270°)

Fine Pan (16-bit)

Pan & Tilt Speed

Tilt (0-270°)

Infinite Pan

Fine Tilt (16-bit)

Infinite Tilt

Pan & Tilt Speed

Zoom (45-5°)

Infinite Pan

Zoom Speed

Infinite Tilt

Red (0-100%)

Zoom (45-5°)

Green (0-100%)

Zoom Speed

Blue (0-100%)

Red (0-100%)

White (0-100%)

Green (0-100%)

Strobe

Blue (0-100%)

Dimmer

White (0-100%)

Virtual Color Wheel

Strobe

Color Presets

Dimmer

Color Presets Dimmer

Virtual Color Wheel

Reset

Color Presets

Ring Macros

Color Presets Dimmer

Ring Macro Speed

Reset

Ring Red (0-100%)

Ring LED 1 - Red

Ring Green (0-100%)

Ring LED 1 - Green

Ring Blue (0-100%)

Ring LED 1 - Blue

Ring Strobe

Ring LED 2 - Red

Ring Dimmer

Ring LED 2 - Green

Ring Macro

Ring LED 2 - Blue

Ring Macro Speed

Ring LED 3 - Red

Ring LED 3 - Green

Ring LED 3 - Blue

Ring LED 4 - Red

Ring LED 4 - Green

Ring LED 4 - Blue

Ring Strobe

Ring Dimmer

Ring Macros

Ring Macro Speed

Summary of Contents for Wink





















Search results

Summary of Contents for Wink

Reviews:

Brands by name

Popular brands

Blizzard Lighting Wink, Manual

Search results

Summary of Contents for Wink

Reviews:

Brands by name

Popular brands