Page 3
Wink™ User Manual - Rev. A
(c) 2017 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Wink™ LED Moving Head Fixture
• 1 x Ever-So-Handy Power Cord
• 1 x Mounting Bracket
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on your purchase of Wink™, your new eye of the storm LED moving head
fixture! Now that you’ve got your Wink™
(or hopefully Winks)
, you should carefully unpack
the box and check the contents to ensure that all parts are present and in good condition.
If anything looks as if it has been damaged in transit, notify the shipper immediately and
keep the packing material for inspection. Again, please save the carton and all packing
materials. If a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and
cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch
.
AC Voltage Switch -
Not all fixtures have a voltage select switch, so please verify that the
fixture you receive is suitable for your local power supply. See the label on the fixture or
refer to the fixture’s specifications chart for more information. A fixture’s listed current
rating is its average current draw under normal conditions. Check the fixture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning!
Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied does
not match the voltage indicated on the voltage selector switch. All fixtures must
be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please just visit our website at www.blizzardlighting.com/
support and open a support ticket. We’ll be happy to help, honest.
Disclaimer:
The information and specifications contained in this document are subject
to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any
errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the
right to update the existing document or to create a new document to correct any errors
or omissions at any time. You can download the latest version of this document from www.
blizzardlighting.com.
Author:
Date:
Last Edited:
Date:
J. Thomas
10/6/2017
J. Thomas
11/9/2017
