Page 13
Wink™ User Manual - Rev. A
(c) 2017 Blizzard Lighting, LLC
System Utilities
Other utilities found within the control panel menu.
Display Timeout:
1.) Navigate the main menu until you reach
Utilities,
press
<ENTER>
.
2.) Highlight
Disp. Setting <ENTER>
, then
Display Timeout <ENTER>.
3.) S
et the timer to shut off the display after 2-60 minutes of inactivity.
Display Invert:
1.) Navigate to
Utilities <ENTER>
, then
Disp. Setting <ENTER>.
2.) Use the
<UP/DOWN>
buttons to select
Display Invert,
press
<ENTER>
.
3.) From here, you can select
Normal
or
Invert
to flip the display.
Pan/Tilt Invert:
1.) Navigate to
Utilities <ENTER>
, then
Pan Invert
or
Tilt Invert <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
Normal,
or
Invert.
3.) Press the
<ENTER>
button to confirm.
Calibration Settings:
1.) Navigate to
Utilities <ENTER>
, then
Calibration <ENTER>.
2.) Highlight either
Pan, Tilt,
or
Zoom,
and press
<ENTER>.
3.) Make any adjustments needed, then press
<ENTER>
to confirm.
Fixture Test:
1.) Navigate the main menu until you reach
Utilities,
press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to select
All
(motors and LEDs),
Pan & Tilt
(motors),
LED
(LEDs only), or
Ring LED
(ring LEDs only.)
3.) Press the
<ENTER>
button to confirm your selection.
Motor/Factory Reset:
1.) Navigate to
Utilities <ENTER>
, then
Motor
or
Factory Reset <ENTER>.
2.) Use the
<UP/DOWN>
buttons to highlight
Yes
or
No.
3.) Press the
<ENTER>
button to confirm.
Runtime Info
1.) Navigate to
Utilities <ENTER>
, then
Time Info <ENTER>.
2.) From here you can view current
Power On
time, and
Last Run
hours.
Software
1.) Navigate to
Utilities <ENTER>
, then
Software <ENTER>.
2.) From here you can view the installed software version information.
