35
Appendix C Troubleshooting
This chapter is intended to help you troubleshoot problems you
may encounter while setting up and using the BWU613B Wireless LAN
USB Adaptor. It also describes some common hardware and software
problems and gives some suggestions to troubleshoot them.
Basic Diagnostics
BWU613B Wireless USB Adaptor cannot work
properly
Installation:
Insert the BWU613B into Notebook’s slot again. The
Power
LED
should be on if the adapter is properly inserted.
Check if the I/O and IRQ for BWU613B Wireless USB Adaptor has
conflict problem with other devices.
Make sure your BWU613B driver is properly installed on your
computer. See driver confirmation in software installation sectors.
Check the Settings for the Access Point.
Make sure the Access Point is powered on and working
properly.
Use the Ping command to ping any other host. If the host
does not respond, your Access Point might not be connected to the
network.
Re-configure and reset the Access Point.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor
