7
2.2 Hardware installation
Depends on the the location of the USB port on your system, you
can choose directly plug the wireless USB adapter into the USB port
on your system or use the included USB cable to connect the system
at one end and connect the USB wireless adapter at the other.
Follow the steps below to install the BWU613B Wireless USB
Adaptor.
1. Find an available USB socket in your computer.
2. Plug one flat end (USB type A) of USB cable into any USB jack on
your computer. Plug the other end, square end (type B) of USB
cable into USB socket on BWU613B Wireless LAN USB Adaptor.
3. Please place the BWU613B in a good position to have the best
wireless connection.
2.3 Software installation
Note: The screens showed below are from Windows 2000. For other
Windows system, the steps are the same, but the screens shown
will be a little different.
2.3.1 Install Driver
1. The Windows will show a message that it has detected an USB
device after you plug the USB adapter into your system. Please
choose the default selection (with “Recommended”) and click
“Next”.
Blitzz NetWave Point II USB – 11M 802.11b Wireless LAN USB Adaptor
