background image

Battery & Charging 

1.

 

If  the robot  cleaner  is  not  in  use,  please  keep  it  on the  charger  or  turn  it  off,  otherwise,  the  battery  will  be 

drained within 24 hours. 
2.

 

Please make sure that the charging station is connected to a compatible power source. 

3.

 

Do not use any battery, charging station or charging cable from any third parties. 

4.

 

Do not open, fix or modify the charging cable, power adapter, charging station or battery without permission. 

5.

 

Do  not  put  the  robot  or  the  charging  station  near  any  heat  source  including  but  not  limited  to:  Heating 

radiators, induction cookers, ovens, and hairdryers. 
6.

 

Do not clean or touch the charging station or the charging electrodes of the robot with a wet cloth. 

7.

 

Do not throw a used battery in the regular waste. Please send the used battery to professional battery recycle 

organization. 
8.

 

Do  not  use  the  power  cable  if  it  is  broken  or  damaged.  Please  contact  our  customer  service  to  choose  and 

purchase a quality replacement cable. 
9.

 

If you need to transport the robot, please make sure it is powered off and packaged in its original packing box. 

10.

 

If you don’t use the robot for a long time, please fully charge it and turn it off. You need to store it in a cool and 

dry place and charge it every three months to prevent over-discharge. 
 

ABOUT YOUR BW-VC1 ROBOT CLEANER 

Unpacking 

When  you  unpack  the  product  box,  you  will  find  the 
following parts and accessories. 
Please  check  whether  they  have  been  included  in  the 
box. 
 
 
Quick Start  X1 
User Manual  X1 
Robot Cleaner  X1 

*

Dust Bin  X1 

*

Filter  X1 

*

Side Brush  X2 

*

Main Brush  X1 

Cleaning Brush  X1 
Charging Station  X1 
Power Cable  X1 
 

*  

This part is already installed in the Robot 

 

Main Body 

 

Summary of Contents for BW-VC1
















Reviews: