8
102619 03/13
Operating Instruction
Inspection and servicing
Oil and water separator
Is fitted downstream of the condensation water
drain. The separated water can be removed
directly into the sewer system.
Rubber-metal connection
To reduce vibrations.
Sound-absorbing hood
To reduce noise emissions.
For more information on these and
other pneumatic accessories, please re-
fer to BLITZ. Our address is on the last
page of these operating instructions.
5
Inspection and servicing
5.1 Safety instructions
The inspection and servicing may be carried
out by experts or trained persons only.
• Switch the compressor off for all servicing
work, and protect the unit against unintenti-
onal operation.
• Prior to any servicing work set the power
switch to off or remove the mains plug.
• Use original BLITZ parts and approved
operating material only.
• After having completed the servicing work
tighten all screws again.
• Depressurise the compressor prior to any
servicing work.
• Touch the compressor system at the on
and off switch only during and shortly after
operation. Permit the compressor to cool
down prior to any servicing work. Hot sur-
faces can cause severe injuries.
5.2 Checking and topping up the oil
level
2
1
3
Fig. 3: Compressor aggregate
1 Oil inspection glass
2 Oil drain plug
3 Oil filler neck
Checking the oil level
Use the oil inspection glass 1 to check the
oil level.
The oil level has to be within the red circle
in the oil inspection glass.
Check whether the oil has a milky discolo-
ration or contains water drops (for measu-
res, please refer to chapter 7 titled “Trouble
shooting / Milky colour of the oil, water
drops in the oil”).
