Blitz DUPLEX S2, Operating Instructions Manual

Page: 15 / 54

3. The lift
9
117127
● 07/2011
3.4 Control cabinet
Illustration 11: Controls on control cabinet
1 Main switch, emergency stop
2 Controls On
Turns the main contactor on. The control panels
are now activated.
3 Controls Off
Turns the main contactor off. The control panels
are now deactivated.
4 Buzzer
Acoustic alarm during lowering the lift below 500
mm (foot protection).
5 Lift allocation switch (optional)
Lifts with 4, 5 or 6 lifting cylinders can be divided
into individual workplaces.
●
A control panel is available for each work-
place.
●
The individual control panels are activated
corresponding to the lift allocation.
6 FOR key switch
Manual adjustment of the vehicle position.
●
Automatic controls are deactivated.
●
Current lift allocation is canceled.
●
Control panel 1 is activated.
●
Control commands Up

and Down

apply
to activated lifting cylinder.
For safety reasons, a second operator must
be called in. This person must permanently
activate FOR switch and monitor the operator.
7 Fault report indicators L1 ... L4
15 fault reports are allocated to the 4 indicators,
depending on On/Off combination (

chapter
7).
11
Distance between axles preset
“AAV”, optional
(

chapter 5.14).
8 Rotary switch for 9 memory presets
The necessary lifting cylinder positions for fre-
quently used vehicles can be stored.
9 POS button
The lifting cylinders move to the selected posi-
tion.
10 SP key switch
The current lifting cylinder position is pro-
grammed for the set memory preset (position
number).
i