9. Setting, indication and maintenance bodies
The setting, indication and maintenance bodies are mounted on the front panel, back panel and on
the lid of the electronic block (Fig.4) of BLISSTOOL LTC64X.
Setting, indication and maintenance bodies of BLISSTOOL LTC64X
On the front panel of the electronic block:
On the back panel of the electronic block:
- VOLUME potentiometer
- COIL connector
- FREQUENCY potentiometer
new
- CHARGE connector
- DISCR LEVEL potentiometer
- Loudspeaker
- DISCR DEPTH potentiometer
- BAT LOW LED
- GAIN potentiometer
new
- PHONES connector
- TONE potentiometer
new
- GROUND MODE switch
On the lid of the electronic block:
- AUTO ZONES switch
- THRESHOLD potentiometer
- DISCRIMINATOR switch
new
- SILENCER potentiometer
new
- GROUND COARSE potentiometer
new
- GROUND FINELY potentiometer
new
To optimally use the capabilities of your BLISSTOOL LTC64X, we recommend that you explore
in detail all its bodies, using as a basis, a detailed description of them available below.
Given its professional character, BLISSTOOL LTC64X has many options for adjust to the realization
of its universality and getting the most of its opportunities.
If the user is a beginner and do not understand for what serve the appropriate potentiometer or
switch, it is sufficient to maintain it in the recommended, in the user guide, level, whereby relatively
easy to make the metal detector in the regime close to optimal, but later, when the user gain
experience in working with the metal detector, to optimize its behavior to a specific terrains by fine
adjustment of the respective potentiometers and switches.
Description of the various bodies:
9.1. VOLUME potentiometer
The VOLUME potentiometer serves as the on/off the metal detector (level
"OFF") and to regulate the audio volume (levels from "1" to "MAX").
For optimal performance, should be placed at the level at which the the
sound produced by the metal detector is a pleasant for listening, ie is not
very loud, nor quiet.
The recommended levels for VOLUME potentiometer are from level "3" to
level "8".
The use of the metal detector at higher levels of VOLUME potentiometer, provides better
audibility of the sound produced by the metal detector, but at the same time increasing the
consumption of power from the LiPo battery of the metal detector and wear it for a short time.
BLISSTOOL LTC64X
- User Guide (version EN201405101504)
Page 17 of 42
