BLiss tuBs
save these instructions
11
© 2015 - 2017 Bliss Walk-in Bathtubs. All Rights Reserved.
•
The plumbing is now ready for the final connection once the tub is put into place. In the
case of a reverse drain installation refer to Appendix C (page 30).
instaLLation
caution...
DOOR DRAIN TUBING NEEDS TO RUN PARALLEL TO THE SUBFLOOR AND THEN
RUN UPWARD TOWARD THE DOOR DRAIN BODY TO ALLOW ACCUMULATED WATER IN THE
DOOR DRAIN TO DRAIN PROPERLY INTO THE DOOR DRAIN TIE-IN. SAGS IN THE DOOR DRAIN
TUBING WILL CAUSE WATER TO BE TRAPPED AT THE LOW POINTS.
© copyright Bliss Tubs 2015
© copyright Bliss Tubs 2015
© copyright Bliss Tubs 2015
Drain Shoe
Check Valve
1½” PVC Door
Drain Tie-In
Door
Drain
Tubing
TOP VIEW
Door Drain
Tub Drain
Check Valve
Drain Piping
Tie-In to P-Trap
Sanitary Tee
90o
Subfloor
Tub
Frame
Note: Door Drain Tie-In should be installed
with the door drain tubing coming out at a 90o
angle parallel with the subfloor. Tubing should
be routed under the tub frame, not over. Cut
door drain tubing to length. Do not cut off
check valve!
SIDE VIEW
1½” PVC Door
Drain Tie-In
Check Valve
90o
Door Drain Tubing
(cut to length)
Tub Entrance
Threshold (6”)
Door Drain
Body
Tub
Door
Door Seal
Door Drain
Tub Floor
Tub
Frame
Subfloor
Downward
Slope to Drain
Plumbing