Step 2.
Installing the Blind into the Brackets
1.
M
ake sure the blind is in closed position to make this step easier.
2.
(Fig.
A&
B)
Tilt the bottom of the head rail forward and hang the inside top edge of the head rail
o
nto
the
front hooks of the brackets.
3.
(
Fig. C)
Rotate head rail back and push firmly to snap the bottom of the bracket under head rail.
4.
(
Fig. D)
You should hear a snap sound for each bracket.
2
(Fig. A)
(Fig. B)
(Fig. C)
(Fig. D)
SNAP
f
Always lower and raise at the center of the blind,
or equally on each end of the blind,
to assure that the bottom rail remains even.
Maintenance Of Your Cordless Blind
To maintain optimal performance of the springs that make your cordless blind function,
periodically
lift and lower your blind through its full range of motion - all the way up and
down to
r
ese
t
the springs.
Step 3.
Operating the Blind
To lower the shade:
Grip bottom rail evenly and pull down to
the desired length.
To raise the shade:
Grip bottom rail evenly and lift towards
head rail to desired height.
To adjust the angle of the slats:
Grip bottom rail evenly and gently pull
down or gently lift up to rotate the slats.
IMPORTANT!
