Before starting
:
Your new Blinds To Go® Cordless Contour
ed faux wood
blind is custom made to your specifications
from the finest
material. The installation should be easy and your blind should fit beautifully.
Note:
Mounting screws provided are suitable for most mounting surfaces.
See below for additional suggestions.
For wallboard or plaster:
Use hollow wall anchors for added support.
For concrete, stone, brick or tile:
Use an appropriate drill and appropriate anchors
before fastening the screws.
For metal surfaces:
Pre-drill holes before fastening the screws.
Parts
Getting started
:
Mounting Options
(please refer only to mounting option specified in your order.)
Inside mount:
Blind is mounted inside the window frame.
Outside mount:
Blind is mounted either on or outside the window frame.
Step 1.
Mounting brackets
Inside mount
–
Mount brackets inside the frame of the window. Be careful not
to mount brackets directly above spring mechanism in head rail; it can cause the
blind to not operate properly. Use a minimum of 2 screws per bracket. Fasten
the brackets to your window frame or wall. For inside mount, the top holes
are
normally used
.
Mounting Bracket
Quantity:
•
2
for up to 33" wide
•
3 for up to 48" wide
•
4 for up to 60" wide
Screws, 1-1/4"
Quantity:
4 per bracket
1
Suggested
Tools
•
Drill
•
Level
•
Pencil
•
Screwdriver
•
Tape measure
Installation Guide
Outside mount
-
Mount bracket on window frame or on wall
above window as desired. Be careful not to mount brackets
directly above spring mechanism in head rail; it can cause the
blind to not operate properly. Use a minimum of 2 screws per
bracket, fasten the brackets to your window frame or wall. For
outside mount, the back holes are normally
used
.
