16
17
information
i
information
i
To add a Group Code press
while it is displayed.
Send a programming call for the new code from the
system encoder.
When the new code appears release the button. The
display will change to show the next Group Code.
If you wish to add another code press
and send a
programming call.
If you do not wish to make changes do not press the
button and allow the pager to return to normal operation.
To configure the pager and program the
identity codes
Switch the pager off
Press and hold button
then switch the pager on.
The pager will display the software title, for example,
then, after a short while, the first 8 function codes
(shown in the table). for example,
Release the button to reveal those remaining.,
for example,
The pager will now show the available function options in
sequence. Press button
only if you wish to make a
change.
LANGUAGE The language options are automatically
shown in sequence. When your required language is
displayed, press and release button
SILENT
RANGE
LED
(Light)
POWER
Continued from previous page
This will store the new code
This will store the new code
To change the setting of a function
press
whilst it is shown on the
display.
Each time you press the button the
setting will change.
If you do not press the button for a
short while the pager will move to
the next function.
IMPORTANT:
Please ensure that the
battery is fully charged
(rechargeable) or new (disposable)
before programming the identity
codes otherwise they might not be
saved to memory.
Block 1 position:
1 = E, D, N, F, G, I (Language)
2 = S (Silent)
3 = R (Range)
4 = L (Light)
5 = P (Switch)
6 = A, B, C (Format)
7 = 0 - 8 (0 to 8 errors)
8 = L ( Long Bleep)
Block 2 position:
1 = 2 - 6 (Decode algorithm)
2 = B (Block message)
3 = U User groups
4 = V (Vibrate)
If you select SILENT the pager will
not bleep on receipt of a call. The
light will still flash, unless it has
been disabled (see 'light' below)
This function, if selected, will cause
the pager to bleep and display
RANGE? if no valid transmission has
been received for approximately 40
s. Other active pager functions will
be displayed alternately. The
RANGE facility must also be
selected in the system encoder.
To prevent the LED from
illuminating select
X
for this option.
Select this option to prevent the
pager being switched off.
Language for prompts:
E, English; D, Dutch; N, Norwegian;
F, French; G, German; I, Italian
NOTE:
Where a dash appears on the
display the function is disabled.
Continued on next page
