Blichmann TopTier Maintenance Manual Download Page 14 | Manualshive

Page: 14 / 14

Blichmann TopTier Maintenance Manual Download Page 14



Blichmann Engineering, LLC 2015

For replacement parts visit blichmannengineering.com/genuine-replacement-parts

14

Maintenance

The TopTier

tm

brew stand requires little maintenance. Inspect fasteners and hoses regularly and replace as

needed. After brewing and allowing the equipment to cool, wipe any drips off with ordinary soap and a soft
sponge and allow to dry.

Warranty

The TopTier

tm

burner is warranted to be free of defects in materials and workmanship for a period of 1yr from

the date of purchase (proof of purchase required).

Specifically EXCLUDED from this warranty are normal wear and tear, damage from abuse, misuse, failure to
follow cleaning and maintenance procedures, and damage from over tightening fasteners. Blichmann
Engineering is not responsible for incidental or consequential damages arising from use or misuse of this
product.  This product is intended for OUTDOOR home use only.  No warranty or guarantee of suitability
(express or implied) is given for commercial use or indoor use of this product.   Blichmann Engineering must be
notified within 7 days of the delivery date of any hidden shipping damage.  Customer is responsible for
shipping damage outside of this time period.  Customer is responsible to keep all original packing material for
warranty returns

– Blichmann Engineering, LLC is not responsible for damage from improperly packaged

warrantee returns and these repair costs will be the responsibility of the customer.  Resolution of warranty
claims will be by repair or replacement and will be the decision solely of Blichmann Engineering.   Shipping
costs for warrantee returns are covered only for the contiguous United States.  User is responsible for
packaging costs and shipping damage if not returned in original packing.  Approval for return must be provided
by Blichmann Engineering prior to any return.

«
...
12
13
14

Summary of Contents for TopTier















Reviews:

No comments