Blichmann Engineering RIMS Rocket Assembly Operation Maintenance Manual Download Page 9

RIMS Rocket™ Owner’s Manual – V1 

©Blichmann Engineering, LLC 2014

 

 

Maintenance: 

 

Cleaning 

The RIMS Rocket™ electric recirculation heater will require cleaning after use. First confirm the custom 
molded plug is disconnected from the RIMS Rocket™ electric recirculation heater and is disconnected 
from any power source. Use hot water and Five Star Chemical’s Powdered Brewery Wash or similar 
detergent with a scrub brush or ScotchBrite™ scouring pad to remove any heavy soil deposits. 
Periodically remove the RIMS Rocket™ electric recirculation heater from the lid to remove build-up of 
mineral deposits. If you brew with particularly hard water, you may need to use a weak acid, such as 
distilled white vinegar, to assist with removing mineral deposits.  The terminal pins of the RIMS 
Rocket™ electric immersion heater can tolerate incidental contact with water in the course of cleaning, 
however, never immerse or soak the terminal pins of the RIMS Rocket™ in water or cleaning solutions.  
 
Before and after each use, inspect the RIMS Rocket™ electric recirculation heater, custom molded plug, 
cable, and connectors for wear or damage. If any of the above parts show signs of wear or damage, 
discontinue use and contact your Blichmann Engineering™ authorized retailer for replacement parts. 
 

Warning:

 ALWAYS make sure the RIMS Rocket™ electric recirculation heater is disconnected from all 

power sources before cleaning. 
 

Warning:

 NEVER immerse or soak the terminal pins of the RIMS Rocket™ in water or cleaning 

solutions. Doing so can cause permanent damage to the heater and create an unsafe condition which 
can result in personal property damage, injury, electrocution or death. ALWAYS allow the RIMS 
Rocket™ electric recirculation heater to thoroughly dry after cleaning and before reinstalling. 
 

Caution:

 Never use chlorine bleach or H-Cl acid to clean your RIMS Rocket™ electric recirculation 

heater. Pitting in the surface of the heater coil and/or bulkhead fittings caused by the use of products 
containing chlorine or H-Cl acid is not covered under the warranty. 

Summary of Contents for RIMS Rocket












Reviews: