Blichmann Engineering RIMS Rocket Assembly Operation Maintenance Manual Download Page 8

RIMS Rocket™ Owner’s Manual – V1 

©Blichmann Engineering, LLC 2014

 

 

NEVER: 

  

 

NEVER leave this equipment unattended 

 

NEVER allow children near this equipment  

 

NEVER heat cooking oil with this equipment  

 

NEVER operate on soft, uneven surfaces like dirt, gravel, or asphalt  

 

NEVER use near or with combustible chemicals, gasoline or other flammable vapors or liquids  

 

NEVER bypass the GFCI circuit protection  

 

NEVER operate any equipment with frayed or damaged power cables 

 

NEVER expose electrical connections to moisture 

 

NEVER connect heater cable assembly directly to power source 

 

NEVER modify or alter the supplied electrical cables or connectors  

 

NEVER operate heater with higher than rated voltage 

 

NEVER unplug heater when energized 

 

NEVER energize the heater without the heating coils fully submerged. 

 

NEVER immerse the terminal pins in water or cleaning solutions 

  

ALWAYS: 

  

 

ALWAYS use heater with rated voltage 

 

ALWAYS unplug heater when de-energized 

 

ALWAYS use on level and stable hard surfaces  

 

ALWAYS connect to a GFCI circuit 

 

ALWAYS check power cables and connectors for signs of damage or wear prior to each use 

 

ALWAYS check that all fasteners are properly tightened prior to each use  

 

ALWAYS use approved control device between heater and GFCI power source 

 

ALWAYS use genuine Blichmann Engineering replacement parts 

 

ALWAYS unplug before moving 

 

ALWAYS allow the brewing equipment to fully cool before handling 

 

ALWAYS wear appropriate personal protective equipment, such as gloves, clothing and 
footwear to prevent burns and scalds 

Summary of Contents for RIMS Rocket












Reviews: