Grain Mill
© Blichmann Engineering, LLC 2020
For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts
4
Hopper Assembly:
After the mill is mounted, assemble the hopper as shown. Only use the nyloc insert nuts provided with the
Philips head screw.
Tip:
Do not tighten the screws until the hopper is assembled and in place on the mill. Hopper panels labeled
“A” are for the left and right side, and panel “B” is the front or back. Panel “A” will be screwed to the outside of
the flanges on panel “B”. Install the hopper onto the mill with the M6 x 1 x 12 screws (the 4 shorter screws).
Tighten the all the screws and install the finger guard “C”.
Mounting the Mill:
Mount the mill to the stand with the
motor switch
facing forward toward the large opening on the stand.
Use the M6 x 1 x 30 screws (the 4 longer screws).
A
C
A
B
B
