manualshive.com logo in svg

Blichmann Engineering BEPS-BK-5BBL-SW, Assembly Operation Maintenance Manual

Share
Download
Blichmann Engineering BEPS-BK-5BBL-SW Assembly Operation Maintenance Manual Download Page 5

5 BBL Single Wall Hybrid Brewhouse V6 

© Blichmann Engineering, LLC 2022 

For replacement parts, visit: blichmannengineering.com/genuine-replacement-parts

5

SINGLE PHASE CONTROLLER

Main Power GFI Breaker

 – this industrial grade GFI (ground fault interrupting) breaker is the connection point for main power 

cables connected to the panel.  Consult your local codes to determine if you can utilize this breaker as a main disconnect as well.  
In any case, we highly recommend a suitable disconnect switch be installed prior to the panel for safe servicing of the panel.  Your 
contractor will need to punch a hole in your panel for the main power cable conduit in your desired location.  Power demand for 
the brewhouse is 150A at 230V (single phase).  Select a main breaker setting for 20% above the appropriate amperage to avoid 
nuisance tripping or as directed by your local codes.

DC Control Power Supply

Main GFI Breaker

Heating Element Breakers

Heating Element Contactors

System Ground

Heating Element 

Ground

Summary of Contents for BEPS-BK-5BBL-SW

















Reviews:

No comments

Brands by name

Popular brands

Load more brands