Blichmann Engineering 1BBL, Assembly, Operation & Maintenance Instructions, Page: 6 / 18

Electric Pilot System V5
© Blichmann Engineering, LLC 2019
6
Familiarize yourself with the function of the brewhouse. Attach
QuickConnectors where needed. Your kit will come with 20 feet
of hose. Attach the hose to the QuickConnectors, stretch to the
desired length, and cut. Once you are satisfied with the length and
location of the hoses, crimp the hoses with a crimping tool.
(Figure 4)
Your parts kit will come with zip ties to label your hose.
Your parts kit will contain adhesive Velcro straps. Use the small straps underneath the table to hold the RipTide™ pump wires.
Use the large Velcro straps to mount to the back of the table. Your table will have 3 or 5 studs on the back to mount your large
Velcro straps to. Attach the large Velcro straps to the back of the table with the adhesive and use the acorn nut to lock them in
place. This will add extra reinforcement to the straps. The stud in the center of the table is for the RipTide™ cord and the 2 studs
closest to the cable hole and grommet is for the BoilCoil™ cables.
(Figure 3)
The AutoSparge™ will come with a kit to use for 30
gallon and 55 gallon kettles. This will include a longer
stem and hose, as well as an extra float ball.
(Figure 5)
*For systems using smaller kettles use what is provided
in the AutoSparge™ box. It will have the correct hose
length, ball, and stem.
Cord Management
Figure 3
Installing Hose
Figure 4
Figure 5
AutoSparge™ Upgrade Kit