Blichmann Engineering 1BBL, Assembly, Operation & Maintenance Instructions, Page: 5 / 18

Electric Pilot System V5
© Blichmann Engineering, LLC 2019
5
There will be 1 or 2 cable pass-through holes in the back of the table to run the controller cords through. If you are using the
Dual Element Controller it is possible for all four cables to fit through a single grommet.
Step 1:
Remove Grommet.
Step 2:
One cable at a time, route cables through the table and grommet.
Step 3:
Re-install grommet into table. (See images below.)
Step 4:
Plug the 115V extension cable(s) into the outlet under the table. Plug the BrewCommander ™ into the extension cord.
5
3
4
2 1
*Pictures shown for 55 gallon
systems only . All other systems will
have 2 cables running through the
grommet.
Installing the BrewCommander ™
Mount the Quick Release plate to the table using the hardware provided.
(Figure 2)
Installing the Therminator™
Figure 2