CV
By default the CV in modulates MODE adjust and CV out is photocell level.
CV in and out modes are selected with Option Mode
The input accepts -5V to +5V signals. The CV output is from 0-5V.
Both in and out are DC coupled.
There is also a CV trigger input on the right channel of the CV in jack. It acts jsut like the BLEEP button in
monetary mode. When it’s high, the voice is activated.
To use it just connect a stereo splitter cable like this to the jack. Left channel is CV in, right is trigger in.
Audio Input
Audio input mode is enabled but plugging a cable into the second jack from the right.
The input mode is then selected just like a voice mode and the audio will still go through the selected e ect.
The audio will only pass through the device when the Bleep button is active.
EYE AM – Eye changes volume. mode adjust knob changes ampli cation level.
Sine AM – Input is amplitude modulated aka ring modded with sine wave. Eye controls pitch, adjust knob
controls depth. Square AM – input is amplitude modulated with square wave. Eye controls pitch, adjust knob
controls depth.
“Glitch shift” granular pitch shift – Eye controls pitch, adjust knob changes grain size.
Resonator 1 – The input signal is analysed and reconstructed as 8 sine waves. Eye changes base pitch, adjust
knob changes fade out time.
Resonator 2 – Audio is reconstructed in six di erent chords selected by adjust knob. Eye is base pitch.
Freeze – Pressing the BLEEP button Eye controls pitch, adjust knob changes grain size.
Digital distortion – Eye changes amount, adjust knob selects 3 di erent types.
