MIDI
MID
I
signals can be sent and received by the Thingamagoop using the MIDI i/o jacks and dongle or over USB.
Input implementation
Channel is default to omni. Select it but using option mode.
Notes – Accurately trigger pitches in the selected voice when the BLEEP button is o . When it is on, the eye
modulates the pitch. Once a note is sent the device will only make sound for notes. The BLEEP button will
only modulate the notes. To get back to normal, simply remove the MIDI input 1/8″ or, for USB, reset the
device.
Pitch bend – Acts in the standard way, 2 octaves up and down.
CC14 – Attack length of notes.
CC15 – Release length of notes.
CC16 – voice adjust
CC17 – Voice mode select. A value of 0-16 selects the Square voice mode, 17-32 Triangle, 33-48 Ramp etc.
CC18 – LEDacle rate adjust
CC19 – LEDacle mode select. 0-42 selects triangle shape, 42-85 square duty, 86-127 random shapes.
CC20 – Direct LEDacle. The CC value is directly outputted through the LED with 0 being o and 127 being full
brightness. CC21 – E ect adjust
CC22 – E ect select
CC23 – Trigger the devices. Acts just like the bleep button. 0-63 o , 64-127 on.
Output implementation
Channel is default to 1. Select it but using option mode.
Notes are sent out continuously based on the photocell eye. When the brigness level changes, the previous
not is turned o and new note comes on.
CC14 – photocell level
CC15 – LEDacle level. Outputs the LED oscillator.
CC16 – 18 Raw value of the controls are sent, just like a standard MIDI controller. SELECT and OPTION
modes have no e ect on the values.
CC16 – Mode knob.
CC17 – LEDacle kbon.
CC18 – e ect knob.
CC19 – Option button. 0-63 o , 64-127 on.
CC19 – Bleep button. 0-63 o , 64-127 on.
CC19 – Eye switch. 0-42 down , 43-85 middle, 85-127 up.
CC19 – Range switch. 0-42 down , 43-85 middle, 85-127 up.
