Connect the mains power cable to the mains
supply or if you have used one end of the USB
power cable connect the other end of the USB
power cable to a USB port on the computer or
computer screen. (Please note that USB
connection is used as a power supply only and
NO software will be downloading via the device to
the computer and NO software is required to run
the Blinknow device). NO specific system
requirements are needed on the computer as the
Blinknow device is a stand alone device (ie NO
specific operating system is required).
The LCD screen housing can be easily rotated as
shown in the photograph to adjust the device
position (7).
Turn Blinknow device to ‘ON’ position using the
on/off button on the top of the device (8).
Once the device is switched on, it will show a
blink. The blink will be repeated at regular
intervals. (Blink rate on the animation cannot be
altered by the user) Follow the cue provided by
the animation on the device screen. It will remind
the user to blink at a healthy rate thus overriding
the blink suppression that can occur during
prolonged computer work. (9).
Please email [email protected] if you
are keen to find out how the Blinknow
device may increase productivity and
worker efficiency in your work place.
(7)
(8)
(9)
Blinknow_IM 7/4/10 13:41 Page 6
