5 |
BLAZE OUTDOOR PRODUCTS
USER MANUAL |
6
venting options
preparation
Remember to plug in and test the hood prior to installation
When planning for the
installation of the vent hood please include an opportunity to access the top of the hood when
the installation is complete This is necessary for service and or replacing parts over time as
there are several fasteners that will need to be accessed
Electrical Requirements
- Hood comes with 4-foot cord, and will plug into the top of the
hood and then into an 110 V GFI protected outlet that should be wired to a 15 AMP breaker
horizontal wall venting
wall hood installation
step 1
Install the wall bracket at the predetermined loca-
tion for the vent hood You will find several holes in
the bracket allowing the installer to fasten directly
to multiple studs in the wall Secure the wall bracket
to the wall studs using the appropriate screws ( not
included ) for the material you are mounting to It
is critical that this mounting bracket be thoroughly
secured to the wall through the wall studs
A -
10 1/4” from the side edge of the hood to the center of the duct
B -
5 11/16” from the wall to the center of the duct (using the included mountin bracket which is be-
tween the wall and hood and is roughly 1/8” thick)
C -
21 1/4” from the center of the duct to the center of the duct
*Note: the two included transition pieces come ready to accept 8” ducting
step 2
Install the vent hood bracket to the vent hood Match the
openings in the vent hood bracket to those on the hood
Use the included screws to tighten the bracket securely to
the vent hood
step 3
Hang the vent hood on the wall bracket You will see 2
rectangular openings between the vent hood bracket
and the hood itself These two openings will install
over and down into place in the corresponding open-
ings on the wall bracket Once in place, secure the
vent hood bracket to the wall bracket with the appro-
priate screws for the material you are mounting to
(not provided)
vertical wall venting
