Version 1.0
BLAZE Instructional Book
Page | 17
NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS
.
UNPACKING UNIT:
Product Inspection
:
A final inspection of your product occurs at the factory to ensure a quality product is
packaged. Please re-check for possible shipping damage immediately after unpacking your burner. If the appliance is
found to have some damage, contact your dealer immediately as often the shipping carrier will have a timeframe to
report damage. Please also save the packaging material the product came with as that is at times inspected by the
shipping carrier.
Caution: Do not leave the unit under the sun with the protective film on for a long period of time as it will
make the film difficult to remove and/or leave markings on the materials which are not covered by the
warranty.
Your BLAZE Series Appliance comes pre-assembled and requires very little setup. We do however; recommend
the use of professional help during the installation of your unit as improper installation may affect your warranty.
Remove the unit from the box along with all accessories and check that no damage has occurred to the unit or
any parts. Remove all packaging materials, labels and protective plastic film before you start cooking
.
Burners: Check the burners and remove any obstructions that may be in the ports or holes. Using cold water and
a brush will be sufficient. Make sure all foreign particles are removed from the burner before use. When finished
ensure that the burners are seated in the burner slots. Failure to do so could result in a fire and injury.
