OM-PI1010A E V1.10
May 21, 2015
Page 5
PI1010A
SPECIFICATIONS
Th
is unit was tested and listed UL 1482 and ULC S628-93 by OMNI-
Test Laboratories.
Th
is manual describes the installation and operation of the Princess
PI1010A catalytic equipped wood heater.
Th
is heater is certifi ed to comply with the 2015 U.S. Environmental
Protection Agency’s particulate emission limits for wood heaters sold
aft er May 15, 2015.
Under specifi c test conditions this heater has been shown to deliver heat at rates ranging from 9300 to 31200 Btu/hr.
Th
is wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against federal regulations
to alter this setting or otherwise operate this wood heater in a manner inconsistent with operating instructions in this
manual.
Th
is wood heater contains a catalytic combustor, which needs periodic inspection and replacement for proper operation.
It is against federal regulations to operate this wood heater in a manner inconsistent with operating instructions in this
manual, or if the catalytic element is deactivated or removed.
Th
e combustor supplied with this heater is a Z4400G ceramic combustor. Consult the catalytic combustor warranty also
supplied with this wood heater. Warranty claims should be addressed to:
in Canada
in USA
Blaze King Industries / Valley Comfort Systems
Warranty Department, 1290 Commercial Way
Penticton, BC Canada V2A 3H5, Ph: 250-493-7444
Blaze King Industries
Warranty Department, 146A Street
Walla, Walla, Washington 99362, Ph: 509-522-2730
EMISSIONS
CO Average(%)
g/hr
Low Burn
0.19
0.42
Med-low Burn
0.24
2.42
Med-high Burn
0.1
2.57
High Burn
0.38
3.15
Model
PI1010A (catalytic)
Overall height and width (incl. shroud)
28 3/4” x 43 1/8” (731 mm x 1096 mm)
Width of fi rebox enclosure (behind shroud)
25 3/4” (654 mm)
Width of fan housing to thermostat housing
35 3/4” (908 mm)
Overall depth and height (fi rebox + conv.
deck)
25 1/8” x 23 1/8” (639 mm x 588 mm)
Flue collar size and distance from shroud
back
6” I.D., 8 3/4” (223 mm)
Recommended fl ue draft
.05” water column (on high burn)
Fire door opening
16 3/8” x 8 3/4” (416 mm x 223 mm)
Firebox depth
18 1/2” (470 mm) brick to brick, 20 1/2” (521 mm) brick to
glass
Firebox width
18 3/4” (477 mm)
Firebox height
13 1/8” (334 mm)
Fire box capacity
2.54 cu. ft.
Recommended Fuel length
16” max. (407 mm)
Wood capacity (approximate):
White oak - 60 lbs. (27.22 kg)
Fir - 40 lbs. (18.14 kg)
Construction
10 gauge & 1/4” fi rebox, brick lined.
Shipping Weight (Firebox only)
325 lbs. (148 kg)
Chimney recommendation (Minimum)
15’ from stove top to chimney cap: Insulated liner recommended
