background image

Version 1.03

April 2011

Chinook CBT

Page 39

G:\pubdata\Manuals\English Manuals\OM-CK24

OM CK24C/CK24F

WHAT THE WARRANTY COVERS:

This warranty contains different terms which cover different parts of the stove. BLAZE KING warrants the STEEL COMPONENTS of
this BLAZE KING stove, which is delivered with this warranty, against defects in material or workmanship to you, the original retail
purchaser (hereafter referred to as purchaser), for a period of up to five (5) years following the date of original retail purchase, subject
to the provisions of the RESPONSIBILITIES OF THE COMPANY below. BLAZE KING warrants the FAN ASSEMBLY, MODULAR
THERMOSTAT, FRONT DOOR GASKET, and WOOD HANDLES of this BLAZE KING, which is delivered with this warranty, against
defects in material or workmanship, to the purchaser, for a period of one (1) year following the date of original retail purchase, subject
to the provisions of the RESPONSIBILITIES OF THE COMPANY below. The CATALYTIC COMBUSTOR is under warranty by Süd
Chemie Prototech of Needham, Massachusetts for six (6) years from the date of original retail purchase. The purchaser shall pay the
following share of the then current retail price for the combustor: The first three (3) years no charge, 4th year 70%; 5th year 80%; 6th
year 90%. The Combustor must be returned to your dealer along with a completed COMBUSTOR FAILURE REPORT. Warranty WILL
NOT BE GIVEN until Süd Chemie Prototech completes an inspection and analysis of the defective combustor.

WHAT THE WARRANTY DOES NOT COVER:

Unless otherwise provided by law or covered by this warranty, BLAZE KING is not responsible for removal, transportation or re-
installation of any product repaired or replaced pursuant to this warranty. BLAZE KING shall in no event be liable for special,
incidental, consequential, indirect or other similar damages arising from the breach of the warranty, even if BLAZE KING has been
advised of the possibility of such damages. Some states/provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. BLAZE KING limits all implied warranties, if any,
including the warranties of merchantability or fitness for particular purpose, to one (1) year from the date of original retail purchase.
Some states/provinces do not allow limitations on how long implied warranty lasts, so the above limitation may not apply to you.
Actions for breach of this warranty must be brought within one (1) year of The expiration of this warranty. There is no warranty on
paint, ceramics, glass, bricks or gold plating. No person is authorized to modify this warranty or to make any additional warranties on
behalf of the manufacturer, BLAZE KING. This warranty applies to units sold, installed and for use in the USA or Canada.

HOW YOU CAN GET SERVICE:

If this product requires repair or replacement due to defects in material or workmanship covered by this warranty, contact your Blaze
King dealer and explain the defect. If the dealer does not repair or replace the product to your satisfaction, contact the Service
Department of Blaze King in the U.S.A. at 1-509-522-2730 and in Canada at 1-250-493-7444 or write to Blaze King at one of the
addresses at the end of this warranty. Please explain the defect and state the model, serial number, date of retail purchase, and the
name and address of your Blaze King dealer. Blaze King may request that the defective part, parts, or the entire stove, be shipped to
one of Blaze King's manufacturing locations at the purchaser’s expense.

RESPONSIBILITIES OF THE COMPANY:

IF the purchaser has complied with all of the terms and conditions of this warranty and IF the purchaser has notified BLAZE KING of a
defect prior to the expiration of the respective warranty period and after shipment, BLAZE KING will either repair or replace the
product, AT ITS ELECTION, or MAY ELECT to refund a portion of the purchase price, based on the formula below, if it cannot readily
and quickly provide the purchaser with a replacement. The repaired product or replacement will be returned to a BLAZE KING dealer
nearest the purchaser at BLAZE KING’s expense. IF it is determined by BLAZE KING that there is no defect, or that the defect
resulted from causes not within the scope of this warranty, THEN the purchaser must bear the cost of storing the product and of
returning the product to the purchaser. For parts of this woodstove or fireplace insert warranted beyond the first year, BLAZE KING
will have the same obligations as described in this paragraph, provided, however, that the purchaser shall pay the following
percentage of the then-current retail cost of the repair or the replacement, according to the year after purchase in which the defect is
brought to the attention of BLAZE KING:

during the 2nd year........................ purchaser pays 20%

during the 3rd year .................................purchaser pays 40%

during the 4th year......................... purchaser pays 60%

during the 5th year .................................purchaser pays 80%

NOTE: TO VALIDATE THIS WARRANTY YOU MUST COMPLETE AND RETURN THE WARRANTY CARD WITHIN 20 DAYS OF
THE DATE OF PURCHASE.

MISUSE OF STOVE NULLIFIES WARRANTY:

The above warranty is conditional upon the proper installation and use of the stove according to the manufacturer’s directions
embodied in the Owner’s Installation and Operation Instructions published by BLAZE KING and in compliance with the local building
or fire codes in the area where it is installed. The stove should be inspected by the Local Building Inspector or Fire Department prior to
beginning use. A copy of the Owner’s Installation and Operation Instructions is provided with each unit, or can be obtained by
contacting BLAZE KING. READ THE OWNER’S INSTALLATION AND OPERATION INSTRUCTIONS BEFORE INSTALLING OR
USING THE STOVE. SAVE THESE INSTRUCTIONS FOR FURTHER MAINTENANCE AND SAFETY PROCEDURES. Alteration of,
abuse of, damage to, lack of maintenance of, faulty repair, OR misuse of the stove, VOIDS this warranty. Use of fuel other than
natural untreated wood (such as artificial logs, wood exposed to salt water, or coal that may burn at excessively high temperatures or
may release fumes that can explode) will VOID this warranty. Burning the stove with the loading door open will also VOID this
warranty. Blaze King stoves have been thoroughly tested under extreme conditions, only abuse and over firing may create noticeable
warping of components. Over firing of your stove will void all warranties implied or otherwise.

OTHER LEGAL RIGHTS OF THE PURCHASER:

This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. All
parts of this warranty are to be interpreted in accordance with the laws of British Columbia/Canada. If you do not agree to the
purchase of the stove on the terms and conditions set out in this warranty, then you must return the stove to the dealer prior to use or
installation, and the purchase price will be refunded.

LIMITED WARRANTY

Summary of Contents for Chinook 20









































Reviews: