OM-AF20.1 E V1.02
May 15, 2015
Page 38
AF20
.1
MAINTENANCE cont.
LOADING DOOR TENSION ADJUSTMENT
1. Remove catalytic thermometer and cast top from stove (
Fig
A
).
2. Remove
left and right cast sides from stove by lift ing up and
out from hangers (
Fig B
). If necessary use a 7/16” wrench
to loosen the top two bolts that secure the cast sides to the
fi rebox.
3. To tighten the door tension use a 7/16” wrench to loosen the
two nuts on the latch cover. Slide the latch cover towards the
back of the stove and tighten nuts (
Fig C
). Repeat paper test
(see “LOADING DOOR GASKET INSPECTION” on page 35).
DO NOT OPERATE THIS WOOD STOVE IF THE DOOR GASKET IS MISSING OR DAMAGED
DANGEROUS OVER FIRING CAN OCCUR WHICH CAN DAMAGE THE APPLIANCE OR IGNITE
CREOSOTE IN THE CHIMNEY, POSSIBLY CAUSING A HOUSE FIRE. IF ANY PART OF THE
WOODSTOVE OR FLUE SYSTEM IS GLOWING THE STOVE IS BEING OVER FIRED.