180-AF25 v1.11 per PE32 revs
March 15, 2021
Page 17
AF25
INSTALLATION INSTRUCTIONS
5.
The thermostat rod should look as shown when
fully open, if not then the rod needs to be re-
inserted at the proper alignment.
6.
Determine which side the nearest electrical
outlet is then feed electrical cable through lower
back corner of the cast facing on that side.
Ensure wiring is tucked above the protruding
flanges of the front cover. (
Fig. 4
)
7.
Slide shroud down behind front cast and fasten
to firebox with seven #8 x 1/2 screws. The
bypass door handle bracket can be screwed to
either side of the shroud. (
Fig. 5
)
Fig. 4
FRONT COVER
BYPASS HANDLE
BRACKET
Fig. 5
NOTE: IF POWER CORD IS RUN
THROUGH THE RIGHT SIDE OPENING
THEN ENSURE THAT THE EXCESS WIRE
IS SECURED WITH A ZIP TIE TO AVOID
POTENTIAL INTERFERENCE WITH FAN.
