36
Switching on by inserting a cassette
If there is no cassette in the device when
it is switched off:
➮
Press the
button
9
.
The flip release panel opens.
➮
Push the cassette gently into the
device, with the open side to the
right, until you feel it stop.
The cassette is then automatically
drawn into the device.
While the cassette is being drawn in,
do not push or pull it.
➮
Close the panel with a gentle push
until it locks.
The device switches on. The cassette
starts playing.
SWITCHING ON AND OFF
Switching On and Off
The device can be switched on and off
in the following ways:
Switching On and Off with the
Vehicle Ignition
If the device is correctly connected to
the vehicle ignition, and has not been
switched off with button
3
, it is switched
on and off along with the ignition.
To switch the device on when the igni-
tion is off:
➮
Press button
3
.
Note:
●
To protect the vehicle battery, the
device is automatically switched off
after an hour if the vehicle ignition
is off.
Switching On and Off with the
Release Panel
➮
Remove the release panel.
The device switches off.
➮
Replace the release panel.
The device switches on. The most re-
cent settings (radio, cassette, CD-
changer or AUX) are restored.
Switching On / Off with button
3
➮
Press button
3
to switch on.
➮
To switch off, hold button
3
pressed for longer than two sec-
onds.
The device switches off.
