Di-
•
d)
Unit Switching
a)
b)
Low Pressure Value Setting Interface
Press & hold the setting button to exit
setting interface.
Press & hold setting button to enter
setting interface.
Press setting button thrice, P4 & default
pressure unit will be shown.
c)
d)
Press OK button, then press the
setting button to switch pressure unit.
Press OK button to select the preferred
unit.
Press & hold the setting button to exit
setting interface.
4.
SETTING
11
12
Problems
Air leakage after sensor installation
No tire data are displayed after
completing installation
Missing or lost sensor
External sensor battery low
Change of tire location
Solutions
The tire valves may not be universal standard, please check with the local
workshop.
Ensure ACC is turned on.
Please purchase new sensor.
Please replace with battery CR1632.
Please reprogram the corresponding sensors.
If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt
authorized dealer if problem persist.
TROUBLESHOOTING
