Safety Notes
This TPMS (Tire Pressure Monitoring System) has
been manufactured according to established safety
guidelines. However, dangers may still occur if the
safety notes in this manual is not observed. This manual
is intended to familiarize the user with the TPMS’s
important functions. Read this carefully, prior to using
the appliance. Keep this manual in an easily accessible
location. In addition, do observe the instructions of the
devices used in conjunction with this appliance.
Road Safety
Always observe the following notes for road safety:
•
General Safety
•
•
•
•
•
•
CAUTIONS
•
This manual may be updated from time to time without
any notice.
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
1
Device must be used in a way that compliments
the safety of the user when driving the vehicle. It
is recommended for the user to park at an appro-
priate location when examining the tires in case of
abnormal alert.
Device is intended for installation and operation
in a vehicle with 12V vehicle system outage, hence
the device must be installed 500mm away from the
DVD or high power equipment to prevent signal
disruption.
Do not dismantle or modify the device. Installation or
repair should be performed by a specialist. Blaupunkt
is not liable for any loss or damage resulting from
unauthorized disassembly or modification to the
device.
Device is designed to monitor tire pressure and
temperature only. Driver is responsible for the
upkeep of the tires.
Blaupunkt is not liable in case of loss of sensors. Con-
tact your Blaupunkt dealer to purchase new sensors.
Package comes with pre-set sensor for designated
tires. In case of sensor replacement or change of
sensor location, ensure the sensor are reprogrammed
before operating.
Please do not operate the device under such
conditions (extremely high temperature or extremely
low temperature); ensure that the temperature within
the car ranges from -30°C to 80°C before you begin
installation process and during operation.
For abnormalities, please refer to the “Trouble-
shooting” section. Consult with Blaupunkt dealer
for further examining, in case if the problem cannot
be resolved.
2
Data Display
Pressure Unit
Display Battery Status
OK Button
Setting Button
TPMS Alarm Icon
STRUCTURE & FUNCTIONS
Functions
Display
1.
2.
3.
4.
5.
6.
Display
4 5
1
2
3
6
1
2
3
4
Sensor Cover
Battery Holder
Battery
Sensor
Rubber Seal
Base
Dust Cap
Aluminium Alloy Nut
Aluminium Alloy Valve
Transmitter
External Sensor
1.
2.
3.
4.
5.
6.
Valve Sensor
1.
2.
3.
4.
External Sensor
Valve Sensor
1
2
3
4
6
5
