Blaupunkt PP6BR, Owner'S Manual, Page: 14 / 162

12
3. Key in the related number by the digit button on remote control can fast pick up and play the
track.
4. Short press the “ REPEAT” button on remote control can switch the play mode between repeat
all, repeat one and random. Press and hold the Play/pause button on front panel of unit 3
seconds can get the same operation.
5. If you want to repeat play a specific section of track, Press and hold the “ REPEAT” button 3
seconds till the P—A show on display to select the start point ; then press and hold the “
REPEAT” button 3 seconds till display show the P--b to select the end point; Then the unit will
repeat play the selected track. Press and hold the “ REPEAT” button till P---E showed on display
can cancel and quit the specific repeat function.
6. During the MP3 play mode, short press the EQ button on remote control can change the
equalizer between NORMAL/ROCK/POP/CLASS/JAZZ/BASS.
Notes:
a. An extension cable for USB connection playing is not recommended, because that will
impact the audio signal transfer and create noise output issue.
b. The unit only can detect and play the music when the USB or microSD card installed.
AUX IN/MP3 Link operation
Using the supplied 3.5mm stereo to 3.5mm audio cable and connect the AUX IN jack on the rear
panel of unit to other player( like MP3 player etc..). Then the unit will enter to the AUX IN
playback mode directly. Select and play the music from your player, then the sound will output
from radio.
Please kindly note the main control is on your player side. The radio only can adjust the volume,
play/pause function in AUX in mode.
Specification:
Power source: DC IN 5V/600mA; 3.7V/1800mA(Battery power)
RMS Output power: 2 x 2.5W RMS. FM frequency: 87.5~108.0MHz.
USB rating output: 150 mA.
Power consumption: 9.5W Standby power consumption: < 0.5 W
Factory default:
System time: 00
：
00,
Time format: 24hours.
Sleep: OFF.
Alarm duration: 5 minutes
Volume: 15
(The specification may revise without prior notice)
PP6BR