Blaupunkt PP6BR, Owner'S Manual, Page: 13 / 162

FM radio operation
The unit has an external antenna which allows you to listen the FM radio station. Before listen
the radio, please fully extent the antenna and try to move the unit next to window in order to
get better radio signal.
Power on the unit, press the “M” key on the top panel of unit or press the “ MODE” button on
remote control can enter to radio mode.
1. Auto tune and preset: short press the “ FM SCAN” button, or press and hold “ PLAY/PAUSE”
button from remote control and top panel of unit in 3 seconds, the unit will scan and save
the available station automatically. The unit can save up to 60 preset stations.
2. Auto scan : Press and hold the “Previous” and” Next” button on top panel of remote
control can auto scan the available station in upward or downward frequency.
3. Station manual memory: When you get a favorite station by auto scan, short press the “
SAVE” button on remote control can save the current station; Short press the “ REPEAT” key on
remote control, then press the volume – and button from remote control can change
the radio frequency per 0.1MHz, press the “SAVE” button can save the current station manually;
remain 10 seconds without operation, the volume knob will resume volume control function.
4. Remove weak signal preset station: in case of you find weak signal or dislike radio station
during preset station picking up by press “ next” and “ previous” button; long press the “ 0”
digit button from remote control can remove the current preset station. And the afterward
preset station number will move forward accordingly.
5. Get a specific station: in order to get a specific frequency station, you can input the
frequency directly by the digit button on remote control. For example, you want to listen the
radio frequency at “ 104.3 MHz”, you just need key in 1-0-4-3 by the digit button of remote
control. Then the unit will skip and play the defined station.
6. Preset station picking up: short press the “ Previous” or “ Next” button on remote control or
front panel can pick up the preset station; Or input preset station number by digit button on
remote control for picking up. For example, you want to listen the preset station number 12,
please just key in 1-2 by remote control, then the related station will be played.
USB and microSD card playback operation
Before start the MP3 playback function, please make sure the USB and microSD card had been
inserted into the USB or microSD port on the unit rear panel. Also, the MP3 music had been
copied and stored inside of device. The unit can support up to 32GB capacity device.
1. Press the “MODE” or “ M” button enter to the USB or microSD card playback mode, the unit can
auto detect and start to play the music after show the total track's number.
2. Short press the “ Previous” or “ Next” button can select the last or next track; press hold and
release the “ Previous” or “Next” button from remote control can fast-forward or fast rewind
the current playing
track.
E
N
G
L
IS
H
11
PP6BR