Blaupunkt PP6BR, Owner'S Manual, Page: 10 / 162

Remote control
01—Repeat button (Repeat all, random and repeat one).
02—Power ON/OFF button.
03—Light button for display backlight brightness adjustment.
04—EQ selection button(only for USB/microSD card playback mode)
05—Play/Pause button.
06—.
07—Volume -.
08—FM auto scan button.
09—Mode button for play source selection.
10—Previous button. 11—Next button.
12—Digits button (0~9).
Notes:
a. Before you use the remote control, please make sure the CR2025 battery has installed inside
properly according to the polarity indication.
b. Please remove the power insulation sheet before use the remote control.
c. Please disposal the exhaust battery in environmental method friendly. Please reference
your local government's requirement for the detail.
d. The best operation distance for remote control is within 5 meters without any block. Please
aim to the remote control sensor on unit front panel for operation.
Unit installment and power setting
DC power:
Using the supplied USB power cable connect with DC adapter; and connect another
terminal of USB cable to the micro USB DC power jack on the back panel of the unit. Then plug
on the DC adapter to your household power source. The red LED power indication will light up
after the power connection successful.
Press the power button in 2 seconds on the front panel of unit to power on/off the unit. Press
the power button from remote control can standby on/off the unit. The display will light up
after power on, and then you can start other operation.
8
PP6BR