OPERATION
7
OPERATION
TURN THE UNIT ON/OFF
Turn on the unit by pressing the
button.
When the system is on, press and hold the
button (2) for 2 seconds to turn off the
unit.
SOUND ADJUSTMENT
Press the
SEL
button (21) briefly to select
the desired adjustment mode. The
adjustment mode changes in the following
order:
-BAS-TRE-BAL-FAD- VOL-
BAS: bass
TRE: treble
BAL: balance
FAD: fader
VOL: volume
By rotating the audio knob (21), it is
possible to adjust the desired sound quality.
Press and hold the
SEL
button (21) for 2 seconds
to call up the system menu.
Press
SEL
button (repeatedly):
TAVOL—LOC ON/OFF –STEREO/MONO –
BEEP ON/OFF – EUROPE/USA
TAVOL
˖
TA volume
LOC: local
TA volume:
It defines the minimum volume for traffic
announcements. The adjustable range is
20–43. The default value is 25. Rotate the
volume knob to adjust the volume of the
traffic announcement.
LOC ON/OFF:
Rotate the audio knob (21)
to turn local function on/off. In LOC ON
mode, the unit reduces the receiving
sensitivity when you search for stations.
That means, stations with strong signals
are received, stations with weak signals are
ignored. In LOC OFF mode, it increases
the receiving sensitivity when you search
for stations. That means, you can receive
more stations.
STEREO/MONO:
Rotate the audio knob
(21) to choose STEREO or MONO mode.
In STEREO mode, you can receive FM
stereo signals. In MONO mode, the stereo
signal is switched to mono. Sometimes
when the signal is poor, switching to MONO
mode will reduce the noise.
BEEP ON/OFF:
The car audio device is
equipped with 2 beep tone modes. Rotate
the volume knob to choose one.
- Beep On mode: The confirmation beep
sound is heard whenever a button is
pressed.
- Beep Off mode: The confirmation beep is
not heard whenever a key is pressed.
EUROPE/USA:
Rotate the volume to
select the region EUROPE or USA.
EQ (Equalization)
Press it briefly to select the preset EQ
mode as shown below:
FLAT—CLASSICS—POP—ROCK—EQ
OFF
