Blaupunkt LS 250, Instruction Manual

Page: 6 / 10

8. Volume -: Volume Down.
5. Remote Sensor.
4. 2.1CH.: 2.1Channel Input Indicator.
6. 5.1CH.: 5.1 Channel Input Indicator.
7. : Volume Up.
FRONT PANEL - CONTROLS AND FUNCTIONS
4 13
OPERATING INSTRUCTION
G. SURROUND(MODE) DECODER
1. Connect and place Center and Rear speakers properly.
2. Press the MODE button on the remote controller to select Surround
Decoder for Home Theater system effects.
2. INPUT: Input select button.
1. MUTE: Mute function button.
3. MODE: Mode select button.
9. LED Display.
Virtual 2.1ch
Virtual 5.1ch
Volume Level
1
2
3
4
5
6
7
8
9
H. 5.1 CHANNELS INPUT
1. Connect the system properly. 5.1 Channels audio output must comply with
5.1 channels audio input.
2. Press INPUT button on the remote controller to shift the status from
audio input to 5.1CH channels input.
3. Adjust all output settings including VOLUME, SW, FRONT,CEN,SURR (if
necessary) now to enjoy the wonderful and tremendous Home Theater effects.
I. MUTE
1. Press the MUTE button on the remote controller once to keep the per-
formance silent.
2. MUTE Indicator on the front panel will then light up.
3. Press it again to resume the performance.
J. RESET
Press the RESET button on the remote controller and it will reset all
settings including SW Speaker output, Front Speaker output ,CENTER
Speaker output, Surround Speaker output to Factory Default settings.