Blaupunkt CASUAL 845, Instruction Manual

Page: 43 / 68

When caring for your machine, cleaning, removing the thread or any other function please make sure that the power is switched
Dismantling and Assembling hook race
To dismantle hook race:
Raise the needle to its highest position and open
the hook cover.
Open the hinged latch of the bobbin case and
remove it from its position
Fitted in the machine
To assemble the hook race:
Hold the hook by the center pin and fit it carefully back to the hook race,
forming a perfect circle with shuttle driver. Attach the hook race ring making
sure bottom pin fits into the notch. Lock the hook race ring by turning the
holders back into position. Insert the bobbin case. Thread the bobbin and
machine, reconnect the power, switch on the machine and you are ready to
sew.
43
When caring for your machine, cleaning, removing the thread or any other function please make sure that the power is switched
machine is unplugged!
Cleaning the Feed Dogs
Disconnect your machine from the power
Cleaning the machine
Oil with one
drop of oil
Clean the hook race with a
brush and a soft dry cloth
Disconnect your machine from
the power source. Open the
hook race ring holders and
remove the hook race ring.
Remove the hook.
Raise the needle to its highest position and open
Fitted in the machine
With a brush, clean out dust and
lint clogging on the feed dog
teeth. Replace the needle plate
and tighten the screws. Remove the needle and the
presser foot. Unscrew the
needle plate set screws and
remove the needle plate.
Hold the hook by the center pin and fit it carefully back to the hook race,
forming a perfect circle with shuttle driver. Attach the hook race ring making
bottom pin fits into the notch. Lock the hook race ring by turning the
holders back into position. Insert the bobbin case. Thread the bobbin and
machine, reconnect the power, switch on the machine and you are ready to
NOTE: It is easier if you lay the machine on its back to replace the race.
EN
When caring for your machine, cleaning, removing the thread or any other function please make sure that the power is switched off and the
Disconnect your machine from the power source
Clean the hook race with a
soft dry cloth.
ith a brush, clean out dust and
lint clogging on the feed dog
teeth. Replace the needle plate
and tighten the screws.
he machine on its back to replace the race.