21
Canberra CM 84
DE
UT
S
C
H
EN
GLI
S
H
IT
A
L
IANO
POR
T
UG
UE
S
NE
DE
RL
AND
ESP
A
GÑ
OL
SVEN
SK
A
F
RANÇAI
S
Note:
Keep you car radio passport with the code
number in a safe place in order to avoid
“unauthorized access” to your car radio.
If you lose your radio passport and have
forgotten your code number, you will not be
able to restart the set after the power supply
has been interrupted. In this case, your radio
can only be made operable again by our
central customer service workshop or by one
of our service agencies abroad.
First-time operation and restart follo-
wing interruption of power supply
•
Switch on the set.
“CODE” will appear on the display.
•
Briefly press preset button 1
7
, “0000”
will appear on the display.
•
Enter the code number given in the
Blaupunkt car radio passport:
Example: the code number is 2521.
- Press preset button 1 twice, “2000”
appears on the display.
- Press preset button 2 five times,
“2500” appears on the display.
- Press preset button 3 twice, “2520”
appears on the display.
- Press preset button 4 once, “2521”
appears on the display.
Anti-theft coding
Normally, all car radios are delivered with the
theft protection being on.
Exception:
With QuickOut sets, the code protection is
deactivated, so that the radio will be ready for
operation as soon as it is inserted into the
compartment.
If the anti-theft coding system is on while the
power supply to the unit is interrupted (e.g.
theft, disconnecting the car battery or prior to
installation), the set is electronically blocked.
Then it may only be used again after the
appropriate code number has been re-
entered (see car radio passport).
Wrong code number entered
It should not be possible for thieves to ascer-
tain the code number by trial-and-error. This
is why the set will be blocked for a certain
period of time if an incorrect code number is
entered. In this case, “- - - -” will appear on
the display.
This waiting time is 10 seconds after the first
three attempts, and 1 hour following subse-
quent attempts.
After 19 unsuccessful attempts, “OFF” will
appear on the display and you can no longer
restart the set.
•
To confirm the code number:
Press the upper part of the rocker
switch
2
.
Your car radio is now ready for operation.
If four dashes again appear on the display,
you have entered a wrong code number.
Now it is essential to enter the correct code
after the waiting period has elapsed (CODE
on the display).
If the set is switched off during the waiting
period, the waiting period commences anew
after switching the set on.
Switching the code system off
•
Turn off the radio.
•
Simultaneously press preset buttons 1
and 4 and hold them down.
•
Turn on the set again. “CODE” will ap-
pear on the display.
•
Enter the code number given in the
Blaupunkt car radio passport and con-
firm:
See example “First-time operation ...”.
The anti-theft coding system is now deactiva-
ted.
