Canberra CM 84
20
Important information
What you must know!
Before starting to use your new car radio, you
should carefully read through the information
on “Traffic safety” and “Anti-theft coding”.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car radio
in a way that could distract you.
Please keep in mind that you travel a distan-
ce of 14 m per second at a speed of only 50
km/h.
Should the traffic situation become particu-
larly demanding, we would advise you not to
use the radio.
When adjusting the volume, make sure that
you are still able to hear all sounds coming
from outside of the vehicle, so that you are
always able to react to warning signals, for
example from the police or the fire brigade.
CD changer (option)
This set allows you to control one of the
following Blaupunkt CD changers: CDC-A03,
CDC-F03.
Please contact your specialised dealer for
more information on these units.
Go through section “CD changer control” for
more information on how to control the indi-
vidual functions.
Installation/hook-up
If you like to install your new car radio by
yourself or add other audio components to
the existing ones, then please read carefully
the enclosed instructions on installation and
hook-up.
QuickOut
With the QuickOut handle you can easily pull
your radio out of the installation compartment
and take it along with you. The preset stati-
ons remain stored for a longer time.
To take out the radio,
•
press knob (a), raise the handle (b) and
pull the unit out.
To listen to the radio or cassette again,
•
push the set into the compartment until
it stops and move the handle back to
the front panel.
If the coding system is off, your set will be
ready for operation.
If the coding system is on, each time the set
is re-inserted into the compartment, you’ll
have to proceed as described under “First-
time operation and restart ...”.
