Canberra CM 84
18
Cassette:
Side 1 or 2
Repeat or skip titles
Metal/CrO
2
Dolby
Radio reproduction
during rapid tape run
CD changer (option):
Title no.
CD no.
7
1, 2, 3, 4, 5, 6 - preset buttons
You can store 6 stations on each FM
memory bank (I, II, III and T) and ano-
ther 6 stations on MW and LW each.
To store a station: Press button during
radio operation and hold it down until
the radio resumes play again.
To recall a station: Select a wa-
veband. For FM stations, also select
the desired memory bank by pressing
FM•T as many times as required. Then
press the corresponding preset button.
Extra function:
Coding - Read chapter “Anti-theft co-
ding” first.
Buttons 1, 2, 3, 4 - To enter the four-
digit code.
Press each button repeatedly until the
four-digit code given in the car radio
passport is displayed.
8
MIX/PS
MIX:
CD changer control
PS (Preset Scan):
To briefly sample all stored stations of
the selected waveband; for FM stations
on the memory banks FM I-III or T.
9
lo
Seek tuning sensitivity
lo lit up in the display indicates normal
seek tuning sensitivity (the system will
pick up strong stations only).
dx lit up in the display indicates high
seek tuning sensitivity (the system will
also pick up weaker stations).
To change the seek tuning sensitivi-
ty: press lo.
:
RM (Radio Monitor)
Use this button to listen to the radio
during fast winding.
;
– Dolby NR*
This set allows you to play cassettes
recorded with Dolby-B noise reduction.
To switch Dolby-NR on/off:
Press the button.
* Noise reduction system manufactured under li-
cense from Dolby Laboratories. “DOLBY” and the
double-D symbol are trademarks of Dolby Labora-
tories.
<
MTL
For optimal reproduction of metal and
CrO
2
tapes.
To switch MTL on/off:
Press the button.
