Important Notes
Ÿ
This safety and operating instruction should be retained for future reference.
Ÿ
The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
Ÿ
Do not install the product in the following areas:
Ÿ
Places exposed to direct sunlight or close to radiators.
Ÿ
On top of other stereo equipment that radiate too much heat.
Ÿ
Blocking ventilation or in a dusty area.
Ÿ
Areas where there is constant vibration.
Ÿ
Humid or moist places.
Ÿ
Do not place near candles or other naked flames.
Ÿ
Operate the product only as instructed in this manual.
Ÿ
Before turning on the power for the first time, make sure the power adaptor is properly connected.
For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to
qualified personnel.
Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all
servicing to qualified service personnel.
SAFETY INSTRUCTIONS
1.
Read Instructions - All the safety and operating instructions must be read before the product is operated.
2.
Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3.
Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4.
Follow instructions - All operating and users' instructions should be followed.
5.
Installation - Install in accordance with the manufacturer's instructions.
6.
Power sources - This product should be operated only from the type of power source indicated by the marking adjacent
to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company.
7.
Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing
or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
8. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch
dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product. Do not place any object containing liquid on top of the product.
9. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts - When replacement parts are required, ensure that the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints - If the product maybe reset or not reset to operation of control due to electrostatic discharge, just
switch off and reconnect again, or move the product to another location.
ERP2 (Energy Related Products) note
This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008
implementing Directive 2009/125/EC regard to standby and off mode electric power consumption of electronic household and
office equipment.
WARNING
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power
supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on a amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on
the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an
hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly
damp cloth.
1
