
ENGLISH
23
Disconnect the BT Drive Free 211 from the power supply if you do not want
to charge the batteries. Disconnect a completely charged battery from
the charger since overcharging negatively impacts the service life of the
battery. If a battery is not used over an extended period of time, it looses
its capacity over time.
Important:
Docking station and headset should be charged completely
if you do not use the devices for a longer period of time. To avoid a deep
discharge of the batteries, you should completely charge the Bluetooth
car kit every 2 months.
Switching BT Drive Free 211 on/off
Switching on
If the headset is switched off , press the MF button of the headset until you
hear 2 signal sounds and the MF button lights up blue 3 times. The headset
is switched on and the MF button fl ashes blue.
Note:
If the pairing with the BT Drive Free 211 was successful, the device
automatically connects with the last connected cell phone after switch-on.
For this purpose, the Bluetooth function of the cell phone must be activated.
The initial pairing is described below.
Switch-off
If the BT Drive Free 211 is switched on, press the MF button until you hear
2 signal sounds and the MF button lights up red for 3 seconds. The device
is switched off .
Registering (pairing) and connecting with the cell phone
Before you can use the BT Drive Free 211, you must register (pair) it with
a Bluetooth-ready cell phone and connect it. The BT Drive Free 211 can be
paired with two telephones, but connected only with one telephone at
a time. Pairing the headset can be done separately or together with the
docking station.
Note:
If the headset is in the docking station, the MF button on the headset
and on the docking station has the same function.
Proceed as described to pair the BT Drive Free 211:
Hold the headset within range of a Bluetooth-ready cell phone; the
distance may not exceed one metre.
The headset must be switched off .
Press the MF button for approx. 5 seconds until you hear a signal sound
and the MF button intermittently fl ashes red and blue.
–
–
–
02_BTDriveFree211_gb.indd 23
02_BTDriveFree211_gb.indd 23
07.04.2011 13:46:55 Uhr
07.04.2011 13:46:55 Uhr