22
Charging the battery in the docking station
The docking station is charged via the USB cable. During the charging
process, the MF button of the docking station lights up red. the complete
charging of the docking station takes approx. 3 hours. The indicator of the
MF button switches off once the charging process is complete.
The docking station and headset are charged simultaneously if the headset
is in the docking station and the charging switch is switched on.
Important:
Switching the charging switch on switches the headset off . An
existing connection to a cell phone is disconnected. The headset cannot
be used during the charging process.
Charging process completed
Disconnect the BT Drive Free 211 after the complete charging process from
the power supply.
Low battery power
If the charging state of the battery in the headset is very low, the MF button
lights up red in every operating state and 5 signal sounds can be heard every
20 seconds until the headset automatically switches off . The docking station
does not feature any warning indicator for low battery power. In this case, a
further operation is no longer possible and the headset cannot be charged
any longer via the docking station without external charger connection.
Battery information
Your device is operated with chargeable batteries. The lithium-ion-polymer
battery of the headset cannot be replaced. The lithium-ion battery of the
docking station can be replaced and is compatible with the Nokia battery
BL-5B. The full performance of a new battery is not achieved until after
two or three complete charging-discharging cycles. The battery can be
charged and discharged several hundred times, but it looses its capacity
over time.
02_BTDriveFree211_gb.indd 22
02_BTDriveFree211_gb.indd 22
07.04.2011 13:46:55 Uhr
07.04.2011 13:46:55 Uhr
