Blaupunkt BT DRIVE FREE 211 Instruction Manual Download Page 10

24

Activate the Bluetooth function of the cell phone and start the search 
for  Bluetooth  devices.  (For  further  details,  please  read  the  operating 
instructions of your cell phone.).
Select "BT DF 211" from the displayed list.
If necessary, enter the PIN code "0000" and confi rm the entry. After suc-
cessful pairing, you hear a long signal sound and the MF button fl ashes 
blue 5 times. The BT Drive Free 211 automatically connects with the cell 
phone and changes to standby mode a few seconds later. In standby 
mode, the MF button fl ashes blue 2 times every 5 seconds. (Note: The 
PIN code is preprogrammed and cannot be changed)
In standby mode, briefl y press the MF button to re-establish the connec-
tion. The connection can be established only if the BT Drive Free 211 is 
no further away from the cell phone than 10 metres.

Note:

 If the pairing is not completed within 2 minutes, the BT Drive Free 211 

switches off  again. In this case, restart the pairing to connect the BT Drive 
Free 211 with the cell phone.

Using the BT Drive Free 211

If the headset is in the docking station, it works together with the docking 
station as hands-free system. The headset can also be used separately for 
phone calls. 
After the pairing has been successfully completed and the battery has been 
charged, the following functions can be performed:

Making a call

Using voice dial

The cell phone must support the voice dial function and the function 
must be activated. The corresponding voice commands for the contacts 
must be recorded in the cell phone. You fi nd the pertinent information 
in the operating instructions of the cell phone. 
If the BT Drive Free 211 is in standby mode, briefl y press the MF button. 
You will hear a short signal sound and the cell phone asks you to say the 
voice command which you recorded in the cell phone for the correspond-
ing contact. If the voice command is recognised by your cell phone, the 
number associated with it is dialled. 

Redialling the last number

In the standby mode, press the MF button twice. You hear a signal sound 
and the number dialled last is dialled again.


02_BTDriveFree211_gb.indd   24

02_BTDriveFree211_gb.indd   24

07.04.2011   13:46:55 Uhr

07.04.2011   13:46:55 Uhr

Summary of Contents for BT DRIVE FREE 211
















Reviews: